microsoft exchange 2007 does not recive any mails, it can send mails

Small Business Server 2008 has just stopped reciveing mails, exchange can send to others in the same domain but not to remote users, no errormessages are comning back to sender
racadataAsked:
Who is Participating?
 
Hilal1924Commented:
I see, Do you have any Anti-Spam product Installed on the server or in the permiter? If you have disable it for some time and then check again. Also check the event viewer and see if you see any errors in the application log. Send yourself a test mail from internet and see if it reaches your server by checking the tracking logs.
 
Hilal
0
 
Hilal1924Commented:
OK from Internet can you telnet on port 25 to your mail server. If you try to send a mail to yourself from Internet, do you get any NDR?
What kind of topology do you have in place? Are you using an Edge Server/Spam Filtering on the perimter?
Do you a diagonostic test from http://mxtoolbox.com and post the results here.
Hilal
0
 
TyBeattyCommented:
It sounds like you have no send or receive connectors.  Was this working previously?

You will need to setup send and receive connectors as well as an accepted domain list.

Tyson
0
Ultimate Tool Kit for Technology Solution Provider

Broken down into practical pointers and step-by-step instructions, the IT Service Excellence Tool Kit delivers expert advice for technology solution providers. Get your free copy now.

 
racadataAuthor Commented:
This is what I'am getting back from mxtoolbox:

smtp:mail.autobude.dk     smtp    
452 4.3.1 Insufficient system resources


 Not an open relay.
 0 seconds - Good on Connection time
 0 seconds - Good on Transaction time
 OK - 80.164.170.114 resolves to
 Warning - Reverse DNS does not match SMTP Banner

0
 
TyBeattyCommented:
Again I will ask the question though, has this worked previously or is this a new install and config?  

0
 
racadataAuthor Commented:
This has been working for over a year now, and stop working for about 4 hours ago - Exchange is running on a Small Business Server 2008 Premium edition
0
 
Hilal1924Commented:
Hi Racadata,
Please go through the link below to modify your backpressure settings which will allow you to free up some resources.
https://exchangepedia.com/blog/2007/03/exchange-server-2007-transport-452-431.html
Also check your Physical Resources such as Disk Space (System, Exchange, Logfile), Memory and Processor utilization and make sure that enough resources are available.
Hilal
0
 
racadataAuthor Commented:
Hi again,

The drive where the transport queue is located has 97,6 GB free space, so this cannot be a problem
I have tried to edit the EdgeTransport.exe.config file changing the line "EnableResourceMonitoring" value to false - and then restarting Microsoft Exchange Transport service - but that didn't fix the problem
0
 
TyBeattyCommented:
Are you able to confirm your send and receive connectors, and that the queues are not frozen for some reason?  And to confirm you are not able to send outside your internal org as well as not receiving in correct?
0
 
Hilal1924Commented:
Can you reboot your server once and check again ?
Hilal
0
 
Hilal1924Commented:
And also check your System Drive and Exchange Installation Drive as well.
0
 
racadataAuthor Commented:
I will try to reboot and get back again
0
 
racadataAuthor Commented:
I have to samefully say that my system drive and my Exchange installation drive are the same (still 97GB free space)
The reboot didn't change anything, still no emails
0
 
racadataAuthor Commented:
I tried moving the Queue to another drive, that seem to do the trick, I'am now receving mails agian. Thanks for all the help
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.