<div>
You should be able to just type the address of the router into your broswer.<br />
<br />
So assume, IP address of router is 192.168.1.1<br />
address is<br />
<br />
<a href="http:\\192.168.1.1" rel="ugc nofollow">http:\\192.168.1.1</a><br />
<br />
Default username and password will be admin *Unless this has been changed!)<br />
<br />
But when using Internet Explorer to access the unit through the web interface, the “Check for newer<br />
versions of stored pages” setting should be set to “Automatically”. This can be accessed by<br />
selecting Tools-&gt;Internet Options-&gt;Temporary Internet Files from the menubar and then clicking<br />
on the Settings button. If the default setting “Automatically” is used, then the web interface works<br />
fine. If the “Every visit to page” setting is used, the web interface is very slow.<br />
<br />

</div>


You should be able to just type the address of the router into your broswer.

So assume, IP address of router is 192.168.1.1
address is

http:\\192.168.1.1 [http:\\192.168.1.1]

Default username and password will be admin *Unless this has been changed!)

But when using Internet Explorer to access the unit through the web interface, the “Check for newer
versions of stored pages” setting should be set to “Automatically”. This can be accessed by
selecting Tools->Internet Options->Temporary Internet Files from the menubar and then clicking
on the Settings button. If the default setting “Automatically” is used, then the web interface works
fine. If the “Every visit to page” setting is used, the web interface is very slow.



<div>
<div class="content wysiwyg-content">
Dear all<br />
<br />
I have switch 3com 4200G and i need to enter it using user web interface .<br />
<br />
how i can do this ..<br />
<br />
please step by step <br />
<br />
Bye
</div>
</div>


Dear all

I have switch 3com 4200G and i need to enter it using user web interface .

how i can do this ..

please step by step 

Bye

how to enter switch 3com 4200G using web interface  ?

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.

Switches / Hubs

A router is a networking device that forwards data packets between computer networks. Routers perform the "traffic directing" functions on the Internet. The most familiar type of routers are home and small office cable or DSL routers that simply pass data, such as web pages, email, IM, and videos between computers and the Internet. More sophisticated routers, such as enterprise routers, connect large business or ISP networks up to the powerful core routers that forward data at high speed along the optical fiber lines of the Internet backbone. Though routers are typically dedicated hardware devices, use of software-based routers has grown increasingly common.

Routers

Networking is the process of connecting computing devices, peripherals and terminals together through a system that uses wiring, cabling or radio waves that enable their users to communicate, share information and interact over distances. Often associated are issues regarding operating systems, hardware and equipment, cloud and virtual networking, protocols, architecture, storage and management.