Link to home
Start Free TrialLog in
Avatar of tropicmar
tropicmar

asked on

cisco 2800 router

i have 2800 cisco router with additional HWIC-1FE, i need to configure this as different VLAN, the problem is even though i install and issue sh ip int bri, i can't see the interface. i insert the HWIC to slot 1.

thanks
Avatar of Istvan Kalmar
Istvan Kalmar
Flag of Hungary image
Hi,

what showS:

sh diag
sh inv
Avatar of tropicmar
tropicmar

ASKER

sh diag

Slot 0:
        C2801 2FE 4SLOT Mainboard Port adapter, 2 ports
        Port adapter is analyzed
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:
        Chassis MAC Address      : 0021.5532.8bd6
        MAC Address block size   : 34
        PCB Serial Number        : FOC12173BT0
        Hardware Revision        : 7.0
        Part Number              : 73-8190-07
        Board Revision           : C0
        Top Assy. Part Number    : 800-23435-05
        Deviation Number         : 0
        Fab Version              : 04
        CLEI Code                : IPM7V00CRA
        RMA Test History         : 00
        RMA Number               : 0-0-0-0
        RMA History              : 00
        Product (FRU) Number     : CISCO2801
        Version Identifier       : V04
        Processor type           : 86
        Chassis Serial Number    : FTX1220W0JX
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF C3 06 00 21 55 32 8B D6 43 00 22 C1 8B 46
          0x10: 4F 43 31 32 31 37 33 42 54 30 40 04 1C 41 07 00
          0x20: 82 49 1F FE 07 42 43 30 C0 46 03 20 00 5B 8B 05
          0x30: 88 00 00 00 00 02 04 C6 8A 49 50 4D 37 56 30 30
          0x40: 43 52 41 03 00 81 00 00 00 00 04 00 CB 89 43 49
          0x50: 53 43 4F 32 38 30 31 89 56 30 34 20 D9 02 C1 40
          0x60: 09 86 C2 8B 46 54 58 31 32 32 30 57 30 4A 58 FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x80: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x90: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0xA0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0xB0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0xC0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0xD0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x100: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x110: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x120: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x130: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x140: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x150: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x160: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x170: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x180: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x190: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x1A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x1B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x1C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x1D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x1E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x1F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

        WIC/VIC/HWIC Slot 1:
        Unknown WAN daughter card
        WIC module not supported/disabled in this slot
        Hardware Revision        : 2.0
        Top Assy. Part Number    : 800-27737-02
        Part Number              : 73-10676-02
        Board Revision           : B0
        Deviation Number         : 0
        Fab Version              : 02
        PCB Serial Number        : FOC13091ZXH
        RMA Test History         : 00
        RMA Number               : 0-0-0-0
        RMA History              : 00
        Product (FRU) Number     : HWIC-1FE
        Version Identifier       : V01
        CLEI Code                : COUIAFTCAA
        Base MAC Address         : 0024.9787.d5b4
        MAC Address block size   : 1
        Connector Type           : 01
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF 40 05 3A 41 02 00 C0 46 03 20 00 6C 59 02
          0x10: 82 49 29 B4 02 42 42 30 88 00 00 00 00 02 02 C1
          0x20: 8B 46 4F 43 31 33 30 39 31 5A 58 48 03 00 81 00
          0x30: 00 00 00 04 00 CB 92 48 57 49 43 2D 31 46 45 20
          0x40: 20 20 20 20 20 20 20 20 20 89 56 30 31 20 D9 02
          0x50: 40 C1 C6 8A 43 4F 55 49 41 46 54 43 41 41 CF 06
          0x60: 00 24 97 87 D5 B4 43 00 01 05 01 FF FF FF FF FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

sh inv

NAME: "2801 chassis", DESCR: "2801 chassis, Hw Serial#: 1778542511, Hw Revision:
 7.0"
PID: CISCO2801         , VID: V04 , SN: FTX1220W0JX

NAME: "C2801 Motherboard with 2 Fast Ethernet", DESCR: "C2801 Motherboard with 2
 Fast Ethernet"
PID: CISCO2801         , VID: 7.0, SN: FTX1220W0JX


Avatar of Istvan Kalmar
Istvan Kalmar
Flag of Hungary image
Hi,

The minimum sofwer that this card recognized: 12.4(15)T IP Base, it seems, tha you need to upgrade the ios to use this card!
Avatar of tropicmar
tropicmar

ASKER

how to do that???
Avatar of Istvan Kalmar
Istvan Kalmar
Flag of Hungary image
you able to download from cisco web, if you have shared support, or please contact your local cisco partner, they help you!
Avatar of tropicmar
tropicmar

ASKER

i will check, i dont have support plan.....
ASKER CERTIFIED SOLUTION
Avatar of Istvan Kalmar
Istvan Kalmar
Flag of Hungary image
Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial