We help IT Professionals succeed at work.

Provide anyconnect client through Cisco ADSM

insi01 asked

We use Cisco ADSM 6.2 for ASA 5520 and SSM10 and I want do provide the anyconnect client for my users through a webpage do download. I know this for example possible on an Astaro.

The client himself can i see under Configuration->Remote Access VPN->Network(Client) Access->Advanced->SSL VPN->Client Settings.

Is that possible?

Watch Question

Top Expert 2010
Yes - You can setup the WEBVPN and allow users to use the WEB VPN web page to sign in, then page checks for the service image of the anyconnect client and will upgrade/install as needed.

 enable outside
 svc image disk0:/anyconnect-win-2.5.0217-k9.pkg 4
 svc enable
 tunnel-group-list enable

Then the group policy would resemble:

group-policy VPN_Policy attributes
 vpn-tunnel-protocol svc webvpn
  url-list value WebVPN_Servers
  svc ask enable default svc timeout 20

If you are doing this through the ASDM, then use CONFIGURATION - REMOTE ACCESS VPN - Clientless SSL VPN Access - Group Policies - Edit the policy - MoreOptions - Login Setting           Here to the right you'll see the "Default Post logon selection" where you can pick "Download SSL VPN Client.