We help IT Professionals succeed at work.

How do I identify the serial number for my Cisco Call Manager

dolphan757
dolphan757 asked
on
I have a linux based call manager and I am trying to access the serial number without having to take it out of the rack. does anyone know how to find out tht eserial num,ber through the web interface? Thanks.
Comment
Watch Question

Commented:
log onto the OS Admin page click show and then hardware and its on the 2nd line down.

Author

Commented:
Status Status: Ready
  Hardware ResourcesPlatform Type 7828H3
Processor Speed 2133
CPU Type Intel(R) Xeon(R) CPU 3050 @ 2.13GHz
Memory 6144 Mbytes
Object ID 1.3.6.1.4.1.9.1.901
OS Version operatingsystem.UCOS3.0.0.0-56
RAID Details Controllers found: 1 ---------------------------------------------------------------------- Logical drive information ---------------------------------------------------------------------- Logical drive number 1 Logical drive name : Device 1 Status of logical drive : Optimal RAID level : 1 Size : 238290 MB Number of chunks : 2 Drive(s) (Channel,Device) : 0,1 0,2 Command completed successfully. Controllers found: 1 Current operation : None Command completed successfully.  

Author

Commented:
this is what is shows. is it the resource type?
Commented:
It should look like this

Platform Type 7825H2
Serial Number XXXXXXXXXXXX
Processor Speed 3400
CPU Type Family: Pentium 4
Memory 2048 Mbytes
Object ID 1.3.6.1.4.1.9.1.583
OS Version operatingsystem.UCOS4.0.0.0-31
RAID Details Controllers found: 1

or you can log into the CLI and type show hardware and it will look like this

admin:show hardware

HW Platform       : 7825H2
Processors        : 1
Type              : Family: Pentium 4
CPU Speed         : 3400
Memory            : 2048 MBytes
Object ID         : 1.3.6.1.4.1.9.1.583
OS Version        : UCOS 4.0.0.0-31
Serial Number     : XXXXXXXXXXXXXX

 

Commented:
It might depend on the version as well. I checked on the OS admin from a browser and it was not there and also the CLI as listed below. Does anyone know why this is and another way to find it, as I am remotely supporting this client>?


 Welcome to the Platform Command Line Interface

admin:show hardware

HW Platform       : 7825H3
Processors        : 1
Type              : Intel(R) Xeon(R) CPU            3050  @ 2.13GHz
CPU Speed         : 2133
Memory            : 2048 MBytes
Object ID         : 1.3.6.1.4.1.9.1.583
OS Version        : UCOS 3.0.0.0-60

RAID Version      :
RAID Firmware Version: N/A
RAID BIOS Version:  Not supported

BIOS Information  :
Vendor: HP
Version: W04
Release Date: 04/13/2007

RAID Details      :
Controllers found: 1

----------------------------------------------------------------------
Logical drive information
----------------------------------------------------------------------
Logical drive number 1
   Logical drive name                  : Device 1
   Status of logical drive             : Optimal
   RAID level                          : 1
   Size                                : 152459 MB
   Number of chunks                    : 2
   Drive(s) (Channel,Device)           : 0,1 0,2


Command completed successfully.
Controllers found: 1

   Current operation              : None