We help IT Professionals succeed at work.

Cisco 1812 Router Config Assistance

wait1
wait1 used Ask the Experts™
on
Hello all!

I am in need of some assistance to setup a Cisco 1812 Router. I am using the FastEthernet0 and 1 ports to hopefully bridge two modems and have it run as a dual WAN Router.

I am unable to get the Cisco to dial using PPPoE through the bridged modems over the FE0 and FE1 ports.

Can someone please give me a sample config that will show me how it should be for a PPPoE connection through a FE port using a bridged modem.

Thanks in advance!
Comment
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®

Author

Commented:
Will see how I go and get back to you.

Thanks!
Istvan KalmarHead of IT Security Division
Top Expert 2010

Commented:
Hi,

This example missing authentication...

What typo of authentication need for ISP?
pap, chap, mschap?
Istvan KalmarHead of IT Security Division
Top Expert 2010
Commented:
FIrt of all you need to disable cdp on pppoe:

router(config)#interface Dialer1
router(config-if)#no cdp enable

and you need to set username/password:

router(config-if)#ppp authentication chap pap callin
router(config-if)#ppp chap hostname ispusername
router(config-if)#ppp chap password isppassword
router(config-if)#ppp pap sent-username ispusername password isppassword
Glad I could help!