Link to home
Start Free TrialLog in
Avatar of Daniel Fishkin
Daniel Fishkin

asked on

Having trouble configuring DVR surveillance camera system for network

I am trying to set up the DVR so as we can see it on our local network, as well as from outside the office.  For some reason, I can not seem to get it working properly.  I have set up pinholes and still no luck.

Here is the info
I set up the DVR with a Static IP address of 192.168.1.75
I have the following port info set up:
Port: 9000
Web Port: 8080
I set up the mac address as advised by them as well: 00-1A-2B-3C-4D-5E

Any assistance would be greatly appreciated
Thank you
ASKER CERTIFIED SOLUTION
Avatar of nwtechdesk
nwtechdesk
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of Daniel Fishkin
Daniel Fishkin

ASKER

I actually got it setup.  I was spacing out and not using the external ip address.  But it is all good now.