corecc
asked on
Connecting a Cisco Small Business pro to a small business Server
Hi Experts
I've just got a Cisco Small Business pro router (SRP 527W) which I want to connect to my sbs 2008. Im running DHCP on my SBS 2008, so need to disable DHCP on my router, however there dosnt seem to be the usual option to just disable DHCP. I'm guessing this may be due to the type of router it is as It has IP phone functionality built in.
I'm guessing the key to achieving what I want here is to setup a VLAN with a static IP instead of IP assigned by DHCP, but this is where I get lost, any advice on networking with VLANs and how to best to configure for my setup would be much appreciated.
I've just got a Cisco Small Business pro router (SRP 527W) which I want to connect to my sbs 2008. Im running DHCP on my SBS 2008, so need to disable DHCP on my router, however there dosnt seem to be the usual option to just disable DHCP. I'm guessing this may be due to the type of router it is as It has IP phone functionality built in.
I'm guessing the key to achieving what I want here is to setup a VLAN with a static IP instead of IP assigned by DHCP, but this is where I get lost, any advice on networking with VLANs and how to best to configure for my setup would be much appreciated.
ASKER
Thanks for you comments Cincy, Ive got that manual and have searched the whole document for info on DHCP, if you look at the screen shots you can see that there is no option to disable DHCP.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Page 163 goes over DHCP settings.