Outside access in works where as inside access out is not working kindly assist

ThaMbU
ThaMbU used Ask the Experts™
on
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname pixfirewall
domain-name ciscopix.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
<--- More --->
         
names
name 10.204.169.23 pms_server
name 192.168.101.2 firedigit_app
object-group service firedigit_services tcp
  description firedigit services
  port-object eq www
  port-object eq ftp-data
  port-object eq https
  port-object eq ftp
  port-object range 1111 1111
access-list outside_access_in permit ip host firedigit_app host pms_server
access-list outside_access_in permit icmp host firedigit_app host pms_server
access-list outside_access_in deny ip any any
access-list outside_inbound_nat0_acl permit ip host firedigit_app host pms_server
access-list inside_outbound_nat0_acl permit ip host pms_server host firedigit_app
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 192.168.101.1 255.255.255.0
ip address inside 10.204.169.28 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm location pms_server 255.255.255.255 inside
pdm location firedigit_app 255.255.255.255 outside
<--- More --->
             
pdm history enable
arp timeout 14400
nat (outside) 0 access-list outside_inbound_nat0_acl outside
nat (inside) 0 access-list inside_outbound_nat0_acl
static (inside,outside) 192.168.101.3 pms_server netmask 255.255.255.255 0 0
static (outside,inside) 10.204.169.22 firedigit_app netmask 255.255.255.255 0 0
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http pms_server 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server community public
<--- More --->
             
no snmp-server enable traps
floodguard enable
telnet timeout 5
ssh timeout 5
console timeout 0
username cisco password 3USUcOPFUiMCO4Jk encrypted privilege 15
terminal width 80
Cryptochecksum:7ba4fd4a113f398be75fbfd8a3123ab1
: end

pixfirewall#  
LMD.jpg
Comment
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®
Steven CarnahanAssistant Vice President\Network Manager

Commented:
I believe the deny has to be the last line:

access-list outside_access_in permit ip host firedigit_app host pms_server
access-list outside_access_in permit icmp host firedigit_app host pms_server
access-list outside_access_in deny ip any any
access-list outside_inbound_nat0_acl permit ip host firedigit_app host pms_server
access-list inside_outbound_nat0_acl permit ip host pms_server host firedigit_app

Top Expert 2009

Commented:
You need NAT for the outbound traffic whether that is PAT'ing behind the outside interface or doing NAT exemption (NAT 0) for traffic if NAT is not needed or occurs elsewhere.

Author

Commented:
hi pony10us

I tried your option of keying in the deny access list at the last but still it gets positioned in the same location.  no success....
Microsoft Azure 2017

Azure has a changed a lot since it was originally introduce by adding new services and features. Do you know everything you need to about Azure? This course will teach you about the Azure App Service, monitoring and application insights, DevOps, and Team Services.

Author

Commented:
hi JFrederick29:
i am trying to do one to one nat with Port translation....
Top Expert 2009
Commented:
Add this to PAT anything that isn't statically NAT'd.

global (outside) 1 interface
nat (inside) 1 0 0
Les MooreSr. Systems Engineer
Top Expert 2008
Commented:
I think this may be what you want

no nat (outside) 0 access-list outside_inbound_nat0_acl outside
no nat (inside) 0 access-list inside_outbound_nat0_acl
no static (inside,outside) 192.168.101.3 pms_server netmask 255.255.255.255 0 0
no static (outside,inside) 10.204.169.22 firedigit_app netmask 255.255.255.255 0 0
no access-group outside_access_in in interface outside
clear xlate

static (inside,outside) 10.204.169.23 10.204.169.23 netmask 255.255.255.255

This single simple static will now allow your acls to work exactly as you have them:

access-list outside_access_in permit ip host firedigit_app host pms_server
access-list outside_access_in permit icmp host firedigit_app host pms_server
access-list outside_access_in deny ip any any
Commented:
It is working fine

Author

Commented:
accepted

Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial