Link to home
Start Free TrialLog in
Avatar of MR_Stefans
MR_Stefans

asked on

AP not accepting its service controller.

Hello,

I have a HP MSM765 AP controller with several AP:s hooked up. However, several of them won't function properly. They have all been given IP:s so it's possible to connect to them manually. The controller says the status for the AP is "Waiting for acceptance", which according to the diagnostic information means that "The AP has been authorized by the service controller. However, the AP has not yet selected the controller to function as its service controller.". But after that nothing happens. The AP:s are HP MSM422 and are not connected to the same subnet.
ASKER CERTIFIED SOLUTION
Avatar of dusanm011
dusanm011
Flag of Serbia image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
SOLUTION
Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of MR_Stefans
MR_Stefans

ASKER

Thank for the quick respons.
DHCP option 43 already set.
DNS cnsrv1 is also set.

We have 17 working AP but they are located on the same subnet as thte controller.
We have 4 note working on another subnet.
We have bought the controller with 40 AP licenses.
SOLUTION
Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
SOLUTION
Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
When we investigated the ports we noticed that the default route was wrong. Problem solved.
Super quick help response.
I had the same issue, somehow the default route had lost it's gateway address after a power outage...