jobby1
asked on
Configuring IBM blade center/SAN
I need to configure the blade sever
HS22, Xeon 4C E5540 in the IBM eServer BladeCenter(tm) H Chassis. Also I need to connect
DS3950 SAN Storage from these blade servers using the QLogic(R) 20-port 8 Gb SAN Switch Module for IBM BladeCenter in a redundant mode. Any documentation with diagrams available.m I am very new to blade technology.
HS22, Xeon 4C E5540 in the IBM eServer BladeCenter(tm) H Chassis. Also I need to connect
DS3950 SAN Storage from these blade servers using the QLogic(R) 20-port 8 Gb SAN Switch Module for IBM BladeCenter in a redundant mode. Any documentation with diagrams available.m I am very new to blade technology.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Part number for server is 7870B4G.
Part number for SAN is 181494H.
We use the below switches for connecting the LAN and to the SAN
46C7191 BNT Virtual Fabric 10Gb Switch Module for IBM BladeCenter
39Y9314 Multi-Switch Interconnect Module for IBM BladeCenter
32R1860 BNT Layer 2/3 Copper Gb Ethernet Switch Module for IBM BladeCenter
44X1905 QLogic(R) 20-port 8 Gb SAN Switch Module for IBM BladeCenter
44X1964 IBM 8 Gb SFP+ SW Optic Transceiver