Solved

Problem with adding Cluster Nodes in windows server 2008

Posted on 2010-08-13
2
355 Views
Last Modified: 2012-05-10
I'm trying to create cluster in windows server 2008 and get this error.

I successfully install failover cluster in two servers (nodes) but i can add second node to the cluster.

got the following error.

"Found duplicate IP address fe80::100:7f:fffe%11 on node CLUSTER01.mydomain.com adapter Local Area Connection* 8 and node CLUSTER02.mydomain.com adapter Local Area Connection* 8."

I used this the following advice from the following link

http://blogs.msdn.com/b/clustering/archive/2008/07/26/8773796.aspx

Still having the same issue, I thought that will solve the problem.

error

Found duplicate IP address fe80::100:7f:fffe%11 on node CLUSTER01.mydomainname.com adapter Local Area Connection* 8 and node CLUSTER02.mydomainname.com adapter Local Area Connection* 8.
0
Comment
Question by:koala-london
2 Comments
 

Expert Comment

by:richardjgreen
ID: 33427244
If you are not using IPv6 on the network then I would try disabling it on all of the nodes in the cluster.
Following the steps in this Microsoft KB you can disable IPv6 via the registry.
http://support.microsoft.com/kb/929852

Once disabled you will need to restart the machines for it to take effect.

Thanks
Richard
0
 

Accepted Solution

by:
koala-london earned 0 total points
ID: 33427284
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Normally after a failure of Domain Controller, when promoting new DC the DC is renamed, we will discuss the options in Dcpromo to re-create the DC with the same name. Scenario: You are a small IT shop with two Domain Controllers (Domain Contr…
A procedure for exporting installed hotfix details of remote computers using powershell
To efficiently enable the rotation of USB drives for backups, storage pools need to be created. This way no matter which USB drive is installed, the backups will successfully write without any administrative intervention. Multiple USB devices need t…
This tutorial will show how to configure a single USB drive with a separate folder for each day of the week. This will allow each of the backups to be kept separate preventing the previous day’s backup from being overwritten. The USB drive must be s…

832 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question