Solved

Cisco IP Phone 7962G SCCP to SIP Problem, asking for XMLDefault.cnf.xml and xmlDefault.CNF.XML and SEP<mac_addr>.cnf.xml and CTL<mac-address>.tlv

Posted on 2010-08-13
6
3,060 Views
Last Modified: 2013-11-30
We have cisco 7960 IP phones which we can convert into SIP from SCCP. Now in a new project we have got Cisco 7062G with SCCP Version SCCP42.8-3-3ES2.sbn.

The problem is that when we try to SIP it it asks for  XMLDefault.cnf.xml and xmlDefault.CNF.XML and SEP<mac_addr>.cnf.xml and   files. I dont know from where to get it however from some source I have prepared these files except  CTL<mac-address>.tlv . Somewhere I found that this is a blank notepad file, Doing that also did not resolve the issue.

I have gone through the upgrade path and the procedures but could not find OS79XX.TXT , SIPDefaultGeneric.cnf, SIPConfigGeneric.cnf, RINGLIST.DAT, and  P0S30300.bin files.

I would appreciate if someone can help me out with all these details because I need to SIP 700 IP Phones which have same issue.

 
0
Comment
Question by:Manishkumarnavar
  • 3
  • 2
6 Comments
 
LVL 4

Expert Comment

by:Valutus
Comment Utility
Its a relatively simple process.  Have a look at this url:  http://www.3cx.com/support/convert-cisco.html
The files you are looking for are included in the Cisco SIP Firmware, which can be downloaded from the Cisco website.

0
 
LVL 4

Expert Comment

by:Valutus
Comment Utility
This link should allow you to download the SIP firmware: http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=281346595
0
 

Author Comment

by:Manishkumarnavar
Comment Utility
Hi,

Apriciate the quick responce but When I download SIP Software from the url  

http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=281346595     There are no files like

SIP001A2F336152.cnf
OS79XX.TXT
SipDefault.cnf
P0S3-08-2-00.sb2
P0S3-08-2-00.sbn
P0S3-08-2-00.loads
P0S3-08-2-00.bin

but it has following files:

apps42.8-3-2-27.sbn
cnu42.8-3-2-27.sbn
cvm42sip.8-3-2-27.sbn
dsp42.8-3-2-27.sbn
jar42sip.8-3-2-27.sbn
SIP42.8-3-3S.loads
term42.default.loads
term62.default.loads

 Please let me know whats wrong with me.


 
0
IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

 
LVL 4

Expert Comment

by:Valutus
Comment Utility
Have a look at the version 7 SIP firmware from Cisco.  It should have the files you require.
0
 

Accepted Solution

by:
Manishkumarnavar earned 0 total points
Comment Utility
I have got the resolution by my own. Will update the same shortly as still testing is going on
0
 
LVL 6

Expert Comment

by:vikrantambhore
Comment Utility
Hello Manishkumarnavar.

Can you suggest me How did resolve this issue, we have same issue on 7941 Ip Phone, It will be a great if u can post solution, I did  open question on EE pleas look
http://www.experts-exchange.com/Networking/Telecommunications/IP_Telephony/Q_26733986.html
0

Featured Post

Free camera licenses with purchase of My Cloud NAS

Milestone Arcus software is compatible with thousands of industry-leading cameras for added flexibility. Upon installation on your My Cloud NAS, you will receive two (2) camera licenses already enabled in the software. And for a limited time, get additional camera licenses FREE.

Join & Write a Comment

This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
Meet the world's only “Transparent Cloud™” from Superb Internet Corporation. Now, you can experience firsthand a cloud platform that consistently outperforms Amazon Web Services (AWS), IBM’s Softlayer, and Microsoft’s Azure when it comes to CPU and …
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

771 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now