Solved

Need a Peer-to-Peer topology for MPLS

Posted on 2010-08-13
3
328 Views
Last Modified: 2012-05-10
Need a Peer-to-Peer topology for MPLS, i am using GNS
0
Comment
Question by:pawanopensource
  • 3
3 Comments
 
LVL 13

Accepted Solution

by:
luc_roy earned 500 total points
ID: 33429600
Are you looking for a drawing or a exported config?
0
 
LVL 13

Expert Comment

by:luc_roy
ID: 33429654
here is a good peer to peer lab for GNS 3

http://www.gns3-labs.com/2008/09/22/multilayer-switching-in-a-campus-network/

they have a bunch of good labs you can also get your MLPS one

0
 
LVL 13

Assisted Solution

by:luc_roy
luc_roy earned 500 total points
ID: 33463764
were you able to access the web sites?
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

856 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question