Solved

Need a Overlay VPN  topology for MPLS

Posted on 2010-08-13
4
300 Views
Last Modified: 2012-05-11
Need a Overlay topology for MPLS , i am using GNS.
0
Comment
Question by:pawanopensource
  • 3
4 Comments
 
LVL 13

Accepted Solution

by:
luc_roy earned 500 total points
ID: 33429668
here is the MLPS VPN you were looking for

http://www.gns3-labs.com/2009/01/23/mpls-vpn-and-traffic-engineering/

This is a great site for all your GNS labs
0
 

Author Comment

by:pawanopensource
ID: 33433257
above link is not opening.
0
 
LVL 13

Expert Comment

by:luc_roy
ID: 33433473
I just clicked on it and it opened right up

 Try a copy and put it in your browser bar, you might have apop up blocker
0
 
LVL 13

Expert Comment

by:luc_roy
ID: 33463757
were you able to access the web sites?
0

Featured Post

Flexible connectivity for any environment

The KE6900 series can extend and deploy computers with high definition displays across multiple stations in a variety of applications that suit any environment. Expand computer use to stations across multiple rooms with dynamic access.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
IPv6 question 1 52
Draytek (Site to Site VPN using IPSec) 6 64
Public DNS  Vs BGP 20 57
How to automatically add a route to a split tunnel VPN 2 25
The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

756 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question