Solved

2 HWIC-4ESW cards on a cisco router

Posted on 2010-08-13
5
584 Views
Last Modified: 2012-05-10
Hi,

How can you make 2 HWIC-4ESW cards on a cisco router ? this seems not to be obvious. you can create vlan, access the vlan ip, but can't access anything connected to that vlan.

thanks
0
Comment
Question by:alyameogo
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
5 Comments
 
LVL 22

Expert Comment

by:Matt V
ID: 33433411
Can you be more specific about what you are trying to do?  It sounds like maybe connect two different networks using VLANs?
0
 
LVL 24

Expert Comment

by:rfc1180
ID: 33433472
>How can you make 2 HWIC-4ESW cards on a cisco router
how can you what?

None of your sentences make sense, please elaborate a bit as to what it is you want to do; possibly attaching a network diagram and/or config of the device.

Billy
0
 
LVL 34

Expert Comment

by:Istvan Kalmar
ID: 33435370
Hi,

you need
vlan 1
 ip add 192.168.1.1 255.255.255.0
vlan 2
 ip addd 192.168.2.1 255.255.255.0

and after you need to go switchport interface
int fast 1/0 ! for example
 switchport mode access
 switchport access vlan 1
0
 
LVL 3

Expert Comment

by:macoronat
ID: 33450207
Can you rephrase?
0
 

Accepted Solution

by:
alyameogo earned 0 total points
ID: 33452632
0

Featured Post

Why You Need a DevOps Toolchain

IT needs to deliver services with more agility and velocity. IT must roll out application features and innovations faster to keep up with customer demands, which is where a DevOps toolchain steps in. View the infographic to see why you need a DevOps toolchain.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Hi there, This article summarizes what you need if you are going to set up your home or small business Network Attached Storage (NAS) to be accessible from the internet. Of course there are configuration differences based on your NAS or router ma…
#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

752 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question