?
Solved

Continuous beep ASUS Motherboard NCCH-DL

Posted on 2010-08-15
4
Medium Priority
?
1,142 Views
Last Modified: 2013-11-09
I have a ASUS NCCH-DL motherboard with BIOS messed up. The PC was working fine with no beeps except the BIOS 1.0 message ( due to power failure while updating the BIOS)

I tried to clear the CMOS jumpers from moving jumper from 1 & 2  to 2 & 3 and setting back to 1 & 2
When i powered back it started continous beep. Finally I realized after removing hard disk and graphics card ( e-GeForce 7800 GS) and powering up with the RAM installed in, there is no beep.
When i reseated the graphics card, it starts continuous beep. Does it mean the graphics card (properly seated) got damaged?
Thanks for your help
0
Comment
Question by:Raheman M. Abdul
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
4 Comments
 
LVL 19

Author Comment

by:Raheman M. Abdul
ID: 33440100
With CMOS battery removed and with graphics card, continuous beep
with CMOS battery and graphics card removed, no beep
0
 
LVL 28

Accepted Solution

by:
burrcm earned 1500 total points
ID: 33440302
If power went off during flash, then it is likely that the beep is due to a corrupt bios rather than a damaged vid card. Easy enough to confirm, just try another. If the bios chip is removable, you may be able to order a replacement from Asus, otherwise any competent electronics outfit should be able to program it for you if you supply the bios file. If the chip is not removable, the board will probably have to be replaced.

Chris B
0
 
LVL 19

Author Comment

by:Raheman M. Abdul
ID: 33441104
Sorry, the beep is due to no power plugged in to the graphics card. Its my mistake as i forgot to plug the cable to the card.
Burrcm: Thanks for the comment and i will give some points to you for the comment.
I will post another question regarding the corrupt BIOS.

0
 
LVL 19

Author Closing Comment

by:Raheman M. Abdul
ID: 33441125
I forgot to give the power supply to the graphics card hence the beep.
thanks anyway
-Mohammed Abdul
0

Featured Post

Limited time offer using promo code EXPERTS30

Designed with a wealth of functionality and convenience, ATEN's new Thunderboltâ„¢ 2 Sharing Switch takes your Thunderbolt setup to the next level. Now through September 15, 2017, Experts Exchange members get 30% off the US7220 on the ATEN USA eShop using promo code EXPERTS30.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

How can this article save you time AND money?  In just a few minutes you may discover something you didn't know existed that is easy enough for you to fix yourself!
pc, laptop  monitor connection configurations
The viewer will learn how to successfully create a multiboot device using the SARDU utility on Windows 7. Start the SARDU utility: Change the image directory to wherever you store your ISOs, this will prevent you from having 2 copies of an ISO wit…
The viewer will learn how to successfully download and install the SARDU utility on Windows 7, without downloading adware.

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question