Solved

Layer 2 Qos Cisco NBAR

Posted on 2010-08-17
2
1,459 Views
Last Modified: 2012-05-10
My organisation will soon be implementing video and voice over IP.
I have done some research on QOS and seem to have the layer aspect of it sorted out with CBWFQ and a priority LLQ queue.

My question is, The core of the network is made up off Cisco 3750 switches. Each subnet has a layer 3 SVI interface on the switch.

Can I apply the CBWFQ LLQ type configuration on the SVI's and If I did that would I need to worry about any layer 2 QOS configuration?

Also, any hints and suggestions if using layer 3 qos on the svi's is going about this the wrong way.

0
Comment
Question by:question01
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 1

Author Comment

by:question01
ID: 33461307
Also, do 3750 layer 3 switches have the NBAR feature?
0
 
LVL 22

Accepted Solution

by:
Jody Lemoine earned 500 total points
ID: 33496196
Unfortunately there's no dice on the NBAR as the only Catalyst switches on record with NBAR are the Catalyst 6000 and 6500 series.

The Catalyst 3750-METRO and 3750X series have CBWFQ configuration capability, but not the Catalyst 3750G or Catalyst 3750E series.

As long as your criteria aren't too complicated, you can use the older-style priority queuing mechanism on the SVIs.
0

Featured Post

MIM Survival Guide for Service Desk Managers

Major incidents can send mastered service desk processes into disorder. Systems and tools produce the data needed to resolve these incidents, but your challenge is getting that information to the right people fast. Check out the Survival Guide and begin bringing order to chaos.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

This article is focussed on erradicating the confusion with slash notations. This article will help you identify and understand the purpose and use of slash notations. A deep understanding of this will help you identify networks quicker especially w…
I recently purchased a Bluetooth headset called the Music Jogger (model BSH10). The control buttons on it look like this: One of my goals is to use it as the microphone and speakers for Skype calls. In that respect, it works well. However, I …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

733 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question