Solved

operating system crash

Posted on 2010-08-18
6
449 Views
Last Modified: 2013-12-05
hi,
can we install operating system in RAID ? If we can install operating system then how to install that? what is the procedure for installing in RAID 1 ?  
0
Comment
Question by:ramachandraraju
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
6 Comments
 
LVL 5

Expert Comment

by:workga
ID: 33465075
You have to create the raid at harware level.  When installing windows you have to make sure you press F6 to add additional drivers for raid.
0
 
LVL 11

Expert Comment

by:Coast-IT
ID: 33465185
Unless it's a HP server with Smartstart, or a Dell server with similar build software, if you use this, it will configure this for you and install all required extra applications and management tools.
0
 
LVL 5

Expert Comment

by:workga
ID: 33465215
I did assume they weren't usually those servers come with proper documentation and cd's to load the server os.
0
How Do You Stack Up Against Your Peers?

With today’s modern enterprise so dependent on digital infrastructures, the impact of major incidents has increased dramatically. Grab the report now to gain insight into how your organization ranks against your peers and learn best-in-class strategies to resolve incidents.

 

Author Comment

by:ramachandraraju
ID: 33465242
hi
if we use RAID 1 in a server to install windows server 2003, what will happened if one disk fail?
i mean if one of the disk in this mirror failed. then how can we recover?
0
 
LVL 5

Accepted Solution

by:
workga earned 25 total points
ID: 33465396
0
 
LVL 11

Assisted Solution

by:Coast-IT
Coast-IT earned 25 total points
ID: 33469510
Are you even using a hardware RAID?

If you are using Windows Software RAID (not as fast, here is a guide to using it.  

http://support.microsoft.com/kb/323432

And yea, the recovery is different depending on what type of RAID1 it is, whether hardware or software.  The top and bottom of it is though, set up an alert when you have a failed disk, replace the disk and rebuild the redundancy back into the mirrored array.
0

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I’m often asked about newer and larger USB drives connected to SBS2008 and 2011 failing Windows Server Backup vs the older USB drives not failing. As disk space continues to grow and drive technology change SBS2008 and some SBS2011 end up with the f…
Issue: One Windows 2008 R2 64bit server on the network unable to connect to a buffalo Device (Linkstation) with firmware version 1.56. There are a total of four servers on the network this being one of them. Troubleshooting Steps: Connect via h…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…
Monitoring a network: why having a policy is the best policy? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the enormous benefits of having a policy-based approach when monitoring medium and large networks. Software utilized in this v…

724 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question