Solved

cannot connect to virtual machines in hyper-v console

Posted on 2010-08-18
5
1,720 Views
Last Modified: 2013-11-06
HI, i have a 2008 hyper-v system with 2 virtual machines running.
This morning i went to connect to one in the console. And all it does is say connecting to server name. And thats it, then says not responding.
In event viewer i get
event id 1002 - application hang
the program vmconnect.exe version 6.0.6002.18005 stopped interacting with windows and was closed

the virtual machines seem to be running fine. But i haven't setup any remote access programs on them to be able to edit them.

any idea's
0
Comment
Question by:total123
  • 3
  • 2
5 Comments
 
LVL 17

Accepted Solution

by:
James Haywood earned 500 total points
ID: 33466066
Hyper-v uses the built in RDP app to connect to the VM. Can you connect to another machine using RDP to confirm it's working correctly?
Can you ping the VM?
0
 

Author Comment

by:total123
ID: 33466275
i've got 2 servers named
e2007 - which i can ping
sqlserver - which i can't ping and were typically migrating our database to tomorrow, great timing.

i cannot rdp into the e2007 server or sqlserver
0
 

Author Comment

by:total123
ID: 33466610
Is Rebooting the main server going to help or hinder ?  
0
 
LVL 17

Expert Comment

by:James Haywood
ID: 33466643
It can't hurt as long as you shut down the VMs first
0
 

Author Comment

by:total123
ID: 33467226
Problem solved. I noticed a load of dfs rep error's not contacting the DC on the main VM server.
I changed the DNS settings to point to the new DNS server, which was put in 3 months ago. And i had taken out the old one. But forgot to change the settings on the VM server.
Then all the server consoles loaded automatically.
Why has this taken 3 months to suddenly happen ?

thanks for your help
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Every once-in-a-while, when you try to add a XenServer host to the System Center Virtual Machine Manager console, it will generate a certificate error, and the XenServer host will not be added to Virtual Machine Manager: If you are experiencing t…
A safe way to clean winsxs folder from your windows server 2008 R2 editions
To efficiently enable the rotation of USB drives for backups, storage pools need to be created. This way no matter which USB drive is installed, the backups will successfully write without any administrative intervention. Multiple USB devices need t…
This tutorial will show how to configure a new Backup Exec 2012 server and move an existing database to that server with the use of the BEUtility. Install Backup Exec 2012 on the new server and apply all of the latest hotfixes and service packs. The…

828 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question