?
Solved

Disable HTTP 1.1 through proxy connections on the client and the site loads well all the time.

Posted on 2010-08-19
6
Medium Priority
?
1,354 Views
Last Modified: 2012-06-27
We have ISA 2006 with service pack 1,  Automatic Updates on Windows 2003 server with internet
explorer version 6
When browsing to certain web sites ( the page will sometimes fail to display, or hang partially loded. IE indicates it is waiting, but it will never complete. CTRL-REFRESH and the page usually hangs again. Click View Source and the HTML text ends prematurely at the same place every time.

Disable HTTP 1.1 through proxy connections on the client and the site loads well all the time.
when enable  HTTP 1.1 through proxy connections ,it does not work .

For one proxy ISA server 2006 with sp1 , if we enable HTTP 1.1 through proxy connections on the client and the site loads well all the time on Internet explorer version 6

for another proxy ISA SERVER 2006 with sp1 Disable HTTP 1.1 through proxy connections on the client and the site loads well all the time.when enable  HTTP 1.1 through proxy connections ,it does not work

IS there setting difference between the  two ISA server.

pls resolve this issue.We want the site to work when HTTP 1.1 through proxy connections is enabled on internet explorer


0
Comment
Question by:arvindp1
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 3
6 Comments
 

Author Comment

by:arvindp1
ID: 33482003
can some one help
0
 
LVL 29

Expert Comment

by:pwindell
ID: 33484799
It is almost always a Browser issue.

There is no "setting" in ISA related to this that I know of.

In IE's Internet Options go to the Advanced Tab and slick the Reset Button, wiat for it to finsh doing its thing.

Then go to the security Tab and select the Internet Zone.  Click the Reset all Zones to Default Button.

Now go back to the first Advanced tab and make sure the HTTP 1.1 is still enabled.

Close, the open the browser and try again.

If that does not work, then I have no answer.
0
 

Author Comment

by:arvindp1
ID: 33485482
If we disable the compression in both ISA server  ,the site loads well ,otherwise it is not working .

why is it only if we disable the compression in ISA server ,the site loads well  when HTTP 1.1 through proxy connections is enabled on internet explorer version 6
0
Veeam Disaster Recovery in Microsoft Azure

Veeam PN for Microsoft Azure is a FREE solution designed to simplify and automate the setup of a DR site in Microsoft Azure using lightweight software-defined networking. It reduces the complexity of VPN deployments and is designed for businesses of ALL sizes.

 
LVL 29

Expert Comment

by:pwindell
ID: 33486122
Because not all Web Site Admins use compression on their web servers that follows proper industry standards.   ISA and TMG are very picky and meticulous in following industry standards exactly.   As a paractice I never run with the compression enabled,...it was a, nice thought,...but not so great in the real world,...unless with can send out the Compression Police to make sure that everyone's compression techniques is done exactly correct.
0
 

Author Comment

by:arvindp1
ID: 33500019
How to create a rule or configure in ISA server to disable compression for particular websites.
0
 
LVL 29

Accepted Solution

by:
pwindell earned 2000 total points
ID: 33503531
Not possible.
You either turn it on,...or you turn it off.
0

Featured Post

Free Tool: Site Down Detector

Helpful to verify reports of your own downtime, or to double check a downed website you are trying to access.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is in response to a question (http://www.experts-exchange.com/Networking/Network_Management/Network_Analysis/Q_28230497.html) here at Experts Exchange. The Original Poster (OP) requires a utility that will accept a list of IP addresses …
This article provides a convenient collection of links to Microsoft provided Security Patches for operating systems that have reached their End of Life support cycle. Included operating systems covered by this article are Windows XP,  Windows Server…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
In this video, Percona Solution Engineer Rick Golba discuss how (and why) you implement high availability in a database environment. To discuss how Percona Consulting can help with your design and architecture needs for your database and infrastr…
Suggested Courses

765 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question