Solved

Speedtouch static ip address to a cisco 506 pix

Posted on 2010-08-19
2
689 Views
Last Modified: 2012-06-27
Hi
I am trying to configure a speedtouch 546 idsn for static ip addresses in the setup of the speedtouch I go to custom setup and entre the IP address of the router **.131.250.14 and the network address of **.131,250.8 with a subnet mask of 255.255.255.248 which gives me the 5 IP addresses I have been given by the ISP provider, my problem lies in: I want the pix to use the IP address of **.131.250.9 and from the Pix I can ping this address, the speedtouch internal ip address is the default 192.168.1.254 how do I assign the **.131.250.9 in the speedtouch setup to give that ip address to the Pix

thank you in advance for any help
0
Comment
Question by:dances1960
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 34

Accepted Solution

by:
Istvan Kalmar earned 500 total points
ID: 33483391
Hi,

You need to set to Bridge mode the modem!
And you need to set the PIX to pppoe mode:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00801055dd.shtml
0
 

Author Closing Comment

by:dances1960
ID: 33488836
Thank you I got it done
0

Featured Post

Raise the IQ of Your IT Alerts

From IT major incidents to manufacturing line slowdowns, every business process generates insights that need to reach the people required to take action. You need a platform that integrates with your business tools to create fully enabled DevOps toolchains.

You need xMatters.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When speed and performance are vital to revenue, companies must have complete confidence in their cloud environment.
Arrow Electronics was searching for a KVM  (Keyboard/Video/Mouse) switch that could display on one single monitor the current status of all units being tested on the rack.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Both in life and business – not all partnerships are created equal. As the demand for cloud services increases, so do the number of self-proclaimed cloud partners. Asking the right questions up front in the partnership, will enable both parties …

695 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question