dsp mini logger

Posted on 2010-08-19
Medium Priority
Last Modified: 2012-08-13
I've entered the following commands on my router to troubleshoot a dsp failure. this process is dsp mini logger that gives information on events happening leading to a DSP failure.

Router(config)# voice dsp 0 command history buffer periodic 10000
Router(config)# voice dsp 0 command history buffer control 10000
Router(config)# voice dsp 0 command history enable
Router(config)# voice dsp 0 command history max-logger-print 1000

I just need to confirm and double check if the output for this would be stored in the log file of the router. So it's viewable by show logging.
Question by:nabeel92
1 Comment
LVL 13

Accepted Solution

luc_roy earned 2000 total points
ID: 33494041
you can view it by using

show voice dsp command history 0

from Privileged EXEC mode

Featured Post

Hire Technology Freelancers with Gigs

Work with freelancers specializing in everything from database administration to programming, who have proven themselves as experts in their field. Hire the best, collaborate easily, pay securely, and get projects done right.

Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

This article will show you step-by-step instructions to build your own NTP CentOS server.  The network diagram shows the best practice to setup the NTP server farm for redundancy.  This article also serves as your NTP server documentation.
In this article I will be showing you how to subnet the easiest way possible for IPv4 (Internet Protocol version 4). This article does not cover IPv6. Keep in mind that subnetting requires lots of practice and time.
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…

624 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question