Solved

QOS for Small Business Server 2003 Remote Web Workplace

Posted on 2010-08-20
1
476 Views
Last Modified: 2012-05-10
We want to ensure quality of service is ensured for off-site clients using remote web workplace.

These clients use remote web workplace for email, and to remotely control their desktops housed here.

What ports are used for this traffic that we should give priority to on our Draytek router?

Thanks in advance.
0
Comment
Question by:broadcastwarehouse
1 Comment
 
LVL 15

Accepted Solution

by:
Dave_AND earned 250 total points
ID: 33484672
3389,443 and  4125. that will give you the best remote experience (as long as you are using SSL sites and not non-ssl)
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
Let’s list some of the technologies that enable smooth teleworking. 
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question