Solved

Adtran router configuration

Posted on 2010-08-20
2
574 Views
Last Modified: 2012-05-10
I currently have three locations I am dealing with.  I have location 1 and 2 that are in the same forest.  Location 1 is the main domain with location 2 apart of the same domain.  Location 1 has a domain trust set up with location 3 which is a totally seperate forest.  I can share files to and from location 1 from both location 2 and 3.  However, Location 3 cannot see location 2 and location 2 cannot see location 3.  I can't ping from either 2 or 3.  Location 2 and 1 are in the same domain just for example abc.com.  How can I get def.com to talk to location 2?
0
Comment
Question by:Steely
2 Comments
 
LVL 63

Accepted Solution

by:
SysExpert earned 500 total points
ID: 33486508
Sounds like you need to open some more ports between 2 and 3

Look at the site 1 to 3 config to see which ports are open

I hope this helps !
0
 

Author Closing Comment

by:Steely
ID: 33905640
Short on comment.  
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Meet the world's only “Transparent Cloud™” from Superb Internet Corporation. Now, you can experience firsthand a cloud platform that consistently outperforms Amazon Web Services (AWS), IBM’s Softlayer, and Microsoft’s Azure when it comes to CPU and …
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

830 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question