Cisco ( MPLS /VPN ) Routing Problem ?

Dear Cisco Experts,

Before off all study the attached diagram carefully and running Configuration

I need to Ping interface ( GE0/0 on router ISDN ) and Ping Server 1 and server 2
Note :  From Laptop I can ping only interface (GE0/1 on Dialup router )
Servers Have 2 Ethernet cards

Thanks

Cisco2811.txt
Dialup.txt.txt
isdn-router.txt
Drawing1.jpg
LVL 4
Muhammed-RummanehAsked:
Who is Participating?
 
bgoeringConnect With a Mentor Commented:
That should likely be

ip route 193.168.6.0 255.255.255.0 BRI1/5

Because

interface BRI1/5
 ip address 193.168.6.1 255.255.255.0

that is configured on BRI1/5
0
 
bgoeringConnect With a Mentor Commented:
In your isdn router you have a statement

ip route 192.168.6.0 255.255.255.0 BRI1/5

That will interfere with traffic returning to your laptop.

Good Luck
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.