Solved

Cisco Wireless bridge question

Posted on 2010-08-22
5
296 Views
Last Modified: 2012-05-10
Hello,

I have two Cisco 1250's, one setup as root with wireless client, and the other as non-root with wireless client. I have put the root in the main office, and put the non-root in the secondary office that is less than 100 feet away. I can from my wireless connection in the secondary office, connect to the non-root and get access to the main building. I than plug in a Cisco switch into the gigabit interface of the non-root, and I cannot get an IP address. I'm using the BVI interface on both AP. Can anyone let me know what I'm doing wrong?

Thanks
0
Comment
Question by:sonos_admin
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
5 Comments
 
LVL 8

Expert Comment

by:bpinning
ID: 33497801
Have you tried setting a static IP on the Switch ?
0
 

Author Comment

by:sonos_admin
ID: 33497835
Yes, I have set a static IP address on VLAN 100. VLAN 100 is our corp network subnet, and both AP have  VLAN 100 setup as well. Do you think I might need to check and see if the gigabit interface is on VLAN 100 on the APs?

Thanks


0
 
LVL 8

Accepted Solution

by:
bpinning earned 250 total points
ID: 33497866
Yes,

Also check your DNS etc on the Switch
0
 

Author Comment

by:sonos_admin
ID: 33497963
Thanks, I will try that tomorrow when I'm back at work.
0
 

Author Closing Comment

by:sonos_admin
ID: 33506369
Thanks for your help, it turns out the issue was on the switch, and not on the AP like I thought. It was the STP running on the switch that was causing the problem.
0

Featured Post

Revamp Your Training Process

Drastically shorten your training time with WalkMe's advanced online training solution that Guides your trainees to action.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is a step by step guide on how to create a basic PTP link using Ubiquiti airOS devices. This guide can be used on the following Ubiquiti AirMAX devices. Nanostation, Bullets, AirBridge, Nanobeam, NanoBridge to name a few. Please review …
This paper addresses the security of Sennheiser DECT Contact Center and Office (CC&O) headsets. It describes the DECT security chain comprised of “Pairing”, “Per Call Authentication” and “Encryption”, which are all part of the standard DECT protocol.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

695 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question