?
Solved

Squid Configue url access  open issues

Posted on 2010-08-22
3
Medium Priority
?
266 Views
Last Modified: 2012-05-10
What command should i use to open a url survey sites  in my squid.conf file, so that users can provide their feedback.

best regards,
Raj
0
Comment
Question by:rroy0371
  • 2
3 Comments
 
LVL 5

Expert Comment

by:tniemetz
ID: 33506354
I think you're talking about allowing access to the survey sites. Given that I would ask;

1. Do you have an acl setup for allowed sites? If so, add the survey site(s) url to the acl file.

If you do not have an acl setup you can set one up.In your squid.conf:

Add a line like this to the bottom of the ACL section:
acl AllowedSites dstdomain "/etc/squid/allowed.sites"

Add this line to the top of the http_access section:
http_access allow AllowedSites

You can also add an acl/domain combination in the conf file with something like this:
acl survey dstdomain .survey-domain-name.com
http_access allow survey

0
 

Author Comment

by:rroy0371
ID: 33506680
Yes I do have the acl setup for my allowed site.

I require to provide the url access like the following, dstdomain .abc.com does not work. Below is the URL. I have other sites which I have open for all the users, for this i need to open the url rather than the domain.

http://abc.com.au/survey1/index.php?sid=79432&lang=en

Thanks in advance!
0
 

Accepted Solution

by:
rroy0371 earned 0 total points
ID: 33507030
i have fixed the problem with another command line which I have get thru some research, thanks for everyone for the help.
0

Featured Post

Keep up with what's happening at Experts Exchange!

Sign up to receive Decoded, a new monthly digest with product updates, feature release info, continuing education opportunities, and more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article will inform Clients about common and important expectations from the freelancers (Experts) who are looking at your Gig.
In this article I will be showing you how to subnet the easiest way possible for IPv4 (Internet Protocol version 4). This article does not cover IPv6. Keep in mind that subnetting requires lots of practice and time.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…

616 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question