Solved

Widnows server 2008 for a seagate 432 autoloader? (dat 72)

Posted on 2010-08-23
3
394 Views
Last Modified: 2013-11-14
does the seagate 432 sutoloader (dat 72) work with windows server 2008r2?
Anyone know where I can find a driver? Going nuts trying to find one.
If not, I may try and set up a virtual win 2003 box on the win 2008 box... but obviously I'd rather run it native.

Anyone?
0
Comment
Question by:jglass03
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 9

Expert Comment

by:Chev_PCN
ID: 33508528
Have you tried just using the Server2003 drivers? 2008 will handle most earlier drivers.
I haven't tried with an autoloader, but certainly on std LTO drives I've seen no compatibility issues.
Hold on. . .did I read this correctly. . do you say a DAT drive?!?!?

The other thing you could try is compatibility mode.

CM.jpg
0
 

Accepted Solution

by:
jglass03 earned 0 total points
ID: 33817987
found the answer myself by working with Seagate technical support.
0
 
LVL 9

Expert Comment

by:Chev_PCN
ID: 33820304
Please could you share the solution? Thanks.
0

Featured Post

Transaction Monitoring Vs. Real User Monitoring

Synthetic Transaction Monitoring Vs. Real User Monitoring: When To Use Each Approach? In this article, we will discuss two major monitoring approaches: Synthetic Transaction and Real User Monitoring.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this article we will learn how to backup a VMware farm using Nakivo Backup & Replication. In this tutorial we will install the software on a Windows 2012 R2 Server.
The business world is becoming increasingly integrated with tech. It’s not just for a select few anymore — but what about if you have a small business? It may be easier than you think to integrate technology into your small business, and it’s likely…
This tutorial will show how to push an installation of Backup Exec to an additional server in both 2012 and 2014 versions of the software. Click on the Backup Exec button in the upper left corner. From here, select Installation and Licensing, then I…
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

690 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question