Solved

Site to site login

Posted on 2010-08-24
5
281 Views
Last Modified: 2012-05-10
Hi
I have a remote office with a member server which has been on the domain in my main office before sighting in my remote office.
I have a VPN up and running between both sites and can ping both sites for each site by IP address but not DNS name, I would like to be able to login to the main domain from the remote site for the member server but can’t seem to get it to see the main site, what am i doing wrong, they are on different subnets on is 192.168.0.0 and the other is 192.168.10.0  
0
Comment
Question by:dances1960
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
5 Comments
 
LVL 6

Accepted Solution

by:
mahrens007 earned 500 total points
ID: 33517337
at the remote site, if you set the DNS to the main site server, are you able to log in?

For example:

192.168.0.10 AD server at the main site

Remote site:
IP: 192.168.10.100 /24
GW: 192.168.10.1
DNS: 192.168.0.10

 
0
 

Author Comment

by:dances1960
ID: 33519573
no I'm unable to login to the main office server from the remote site although I can ping it by IP address
0
 
LVL 6

Expert Comment

by:mahrens007
ID: 33519628
what type of firewalls do you have in place?
0
 

Author Comment

by:dances1960
ID: 33520894
i can now ping by DNS name and ip address, but still cannot get on the network in the main office, other than the Pix I only have symantic on as firewall
0
 
LVL 6

Expert Comment

by:mahrens007
ID: 33540412
Dances1960 - I'm assuming you have it working?
0

Featured Post

Free eBook: Backup on AWS

Everything you need to know about backup and disaster recovery with AWS, for FREE!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

For anyone that has accidentally used newSID with Server 2008 R2 (like I did) and hasn't been able to get the server running again because you were unlucky (as I was) and had no backups - I was able to get things working by doing a Registry Hive rec…
After seeing many questions for JRNL_WRAP_ERROR for replication failure, I thought it would be useful to write this article.
This tutorial will walk an individual through locating and launching the BEUtility application to properly change the service account username and\or password in situation where it may be necessary or where the password has been inadvertently change…
This tutorial will show how to configure a new Backup Exec 2012 server and move an existing database to that server with the use of the BEUtility. Install Backup Exec 2012 on the new server and apply all of the latest hotfixes and service packs. The…

724 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question