Solved

VPLS over MPLS

Posted on 2010-08-24
2
331 Views
Last Modified: 2012-05-10
Hi,

We're having several office locations for our company, and would like to make some sort of transparent LANs on all these locations, so as if location X has 192.168.1.0/24, location Y would have the same subnet etc.

We're using MPLS to uplink all our locations at this point, so I was looking for some possibilities doing these over MPLS tunnels. I quickly found out about VPLS, and it seems to be doing exactly what I need it todo.

At this point, Im looking for products to do this with. I need some gateways/routers to hook up with our MPLS routers and have the gateway/routers do vpls over the mpls tunnels.

Any suggestions?
0
Comment
Question by:farodane
2 Comments
 
LVL 8

Accepted Solution

by:
SylvainDrapeau earned 500 total points
ID: 33517939
Hello !

Cisco 7600 does that. See this document from Cisco :

http://www.cisco.com/en/US/docs/solutions/Enterprise/Data_Center/desguide.pdf

The part you're interrested in starts in chapter 4.

Syldra
0
 

Author Closing Comment

by:farodane
ID: 33671802
Allright, it was ok.
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
How to setup 3 isps on a redundant mode? 3 33
Help logging in to my router 12 57
Network Vs Redistribute Connected Commands 3 38
ASA 5505 packet drops 14 42
Getting hacked is no longer a matter or "if you get hacked" — the 2016 cyber threat landscape is now titled "when you get hacked." When it happens — will you be proactive, or reactive?
Let’s list some of the technologies that enable smooth teleworking. 
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

791 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question