Solved

Retrieve routing table via SNMP RO Access

Posted on 2010-08-24
3
1,599 Views
Last Modified: 2012-06-27
I have RO SNMP access to a Cisco 2851, is it possible to get the routing table out of the device using only SNMP - if so, how?

Thanks in advance to anyone with any ideas :)
0
Comment
Question by:Suncore
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 15

Accepted Solution

by:
greg ward earned 500 total points
ID: 33518654
http://sourceforge.net/projects/tftpterminal/files/Extras/SNMP%20WALKER.zip/download
The above is a SNMP walker, if you know the routing table you should be able to get the oids.
1.3.6.1.2.1.4.21.1. 1.129.44.25.0.0 172.25.0.0 < my network address
1.3.6.1.2.1.4.21.1.11.129.44.25.0.0  255.255.255.0 <my subnet mask
it looks like the oids might be dependant on the ip of the network address.
 
 
Greg
0
 
LVL 2

Author Comment

by:Suncore
ID: 33526917

Greg - Thankyou I am going to give this a try.
0
 
LVL 2

Author Closing Comment

by:Suncore
ID: 33527106
Perfect solution, thankyou.
0

Featured Post

Secure Your Active Directory - April 20, 2017

Active Directory plays a critical role in your company’s IT infrastructure and keeping it secure in today’s hacker-infested world is a must.
Microsoft published 300+ pages of guidance, but who has the time, money, and resources to implement? Register now to find an easier way.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

While it is possible to put two routes in place with the secondary having a higher metric, this may not always work. In the event of a failure that does not bring down the physical interface on the router the primary route is not removed. There is a…
Quality of Service (QoS) options are nearly endless when it comes to networks today. This article is merely one example of how it can be handled in a hub-n-spoke design using a 3-tier configuration.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

733 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question