Solved

HP DL385 with MSA500 Connection Issues

Posted on 2010-08-25
1
989 Views
Last Modified: 2013-11-14
I have two HP DL385 G1 servers connected to my HP MSA500. One has Windows Server 2003 and one has Server 2008 R2. The MSA is split into 2 x Logical Disks. One is presented to the Server 2003 and one to the Server 2008 R2. The problem I have is with the Server 2008 R2. It appears in My Computer as D:\ but when you open it, it says "D:\ is not accessible, Access is Denied" It used to work on this server under server 2003, and I also was able to use it under 2008 R2, when I first installed the OS, but now I can't. I have checked that drivers are on and they seem to be, and I can't see any errrors in the event logs and on the Array Config Utility, is says that everything is "ok"

Is there something I have missed??? You help would be appreciated, thanks
0
Comment
Question by:andrewjones1987
1 Comment
 
LVL 2

Accepted Solution

by:
andrewjones1987 earned 0 total points
ID: 33521413
I have solved this situation myself......it seems that somehow the hard drive had lost all of its permissions and only Local Administrator had access, so I reset the permissions and all is ok now.
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Possible fixes for Windows 7 and Windows Server 2008 updating problem. Solutions mentioned are from Microsoft themselves. I started a case with them from our Microsoft Silver Partner option to open a case and get direct support from Microsoft. If s…
When we purchase storage, we typically are advertised storage of 500GB, 1TB, 2TB and so on. However, when you actually install it into your computer, your 500GB HDD will actually show up as 465GB. Why? It has to do with the way people and computers…
This tutorial will walk an individual through the steps necessary to join and promote the first Windows Server 2012 domain controller into an Active Directory environment running on Windows Server 2008. Determine the location of the FSMO roles by lo…
This Micro Tutorial hows how you can integrate  Mac OSX to a Windows Active Directory Domain. Apple has made it easy to allow users to bind their macs to a windows domain with relative ease. The following video show how to bind OSX Mavericks to …

821 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question