Solved

cannot boot to Disk0 cisco  router7200 how let it auto startup in Disk0:

Posted on 2010-08-25
4
882 Views
Last Modified: 2012-06-21
when ever time Imake reload to router , it go to rommon  
and  i should write this comment  
rommonn > boot Disk0:c7200XXXXXXXX

how let it auto startup in Disk0: !!!! when reboot  


7200#show version
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-G4JS-M), Version 12.3(5a)B4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsuppoo drt
Copyright (c) 1986-2005 by cisco Systems, Inc.
Configuration register is 0x0
0
Comment
Question by:metaprov
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 28

Accepted Solution

by:
Jan Springer earned 500 total points
ID: 33521875
config t

boot system flash disk0:c7200XXXXXX.bin
config-register 0x2102


The first statement should not be necessary if you only have one image and don't need to specify which image to boot if you set the config register properly.
0
 

Author Comment

by:metaprov
ID: 33541022
how I close this issue !!!
0
 
LVL 28

Expert Comment

by:Jan Springer
ID: 33541755
From the FAQ:

How do I close a question?

There are five ways:

   1. Accept an Expert's Comment as the Solution:
      If an Expert has given you the solution to your question, or has led you to the solution, click the Select As Solution button on the comment that provided the solution.

   2. Accept Multiple Solutions:
      If several Experts collaborated to provide a solution, use this option and split the points among them. You can do this by clicking on the Accept Multiple Solutions button on any of the comments that were helpful.

   3. Accept Your Own Comment as the Solution:
      If you solved your problem with no assistance from any Expert, post your solution and then click the Accept As Solution button in your own comment.

   4. Accept Your Own Comment and Award Point to an Expert for Their Assistance:
      If you answered your own question, but wish to award points to Experts for their attempts to help, click the Accept and Award Points button on your comment.

   5. Delete Your Question:
      If you are not getting the response that will lead to a solution you should consider deleting your question and trying again. You should also delete your question if you are no longer having your issue or if the problem solved itself. You can do this by clicking the Delete Question button found by your question body.

      If you are not certain which selection to make, click the Request Attention button, and the Moderators will help you with the proper choice.
0
 

Author Closing Comment

by:metaprov
ID: 33542103
no
0

Featured Post

Flexible connectivity for any environment

The KE6900 series can extend and deploy computers with high definition displays across multiple stations in a variety of applications that suit any environment. Expand computer use to stations across multiple rooms with dynamic access.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
2 routers and 1 public IP Address. 10 61
Port not opening complex Huwaei Router - Sonicwall - Airport extreme 32 99
Draytek (Site to Site VPN using IPSec) 6 67
Router question 6 246
I have seen some questions on problems with SSH/telnet access to Cisco routers that may occur despite the fact that from a PC connected to your LAN, Internet connectivity is in place and users can access Internet sites without any issues.  There are…
Problem Description:   Couple of months ago we upgraded the ADSL line at our branch office from Home to Business line. The purpose of transforming the service to have static public IP’s. We were in need for public IP’s to publish our web resour…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

733 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question