<div>
<div class="content wysiwyg-content">
Trying to figure out how to set an inbound route within Trixbox, that is a number lets say 12345678901 calls in, that it gets forwarded to another trunk, in this case a trunk from Trixbox to CUCM, prefer to find out how to make it work via the trixbox GUI, however if I need to add the dial plan I dont mine
</div>
</div>


Trying to figure out how to set an inbound route within Trixbox, that is a number lets say 12345678901 calls in, that it gets forwarded to another trunk, in this case a trunk from Trixbox to CUCM, prefer to find out how to make it work via the trixbox GUI, however if I need to add the dial plan I dont mine

Trixbox -&gt; CUCM 7+ Dial Plan

IP telephony (Internet Protocol telephony) is a general term for the technologies that use the Internet Protocol's packet-switched connections to exchange voice, fax, and other forms of information that have traditionally been carried over the dedicated circuit-switched connections of the public switched telephone network (PSTN). Using the Internet, calls travel as packets of data on shared lines, avoiding the tolls of the PSTN. The challenge in IP telephony is to deliver the voice, fax, or video packets in a dependable flow to the user.

Trixbox -&gt; CUCM 7+ Dial Plan

Trixbox -> CUCM 7+ Dial Plan