Solved

TMG MBE on EBS

Posted on 2010-08-30
5
876 Views
Last Modified: 2013-11-10
Hi,

I get in trouble with TMG MBE on EBS.
When I configure or reconfigure any rules and I apply it, communication beetwen internal and external is donw because the default gateway in internal NIC is configured on 0.0.0.0
Any idea why I have this trouble ?

Regards.
GG.

0
Comment
Question by:ggsbs
  • 3
  • 2
5 Comments
 
LVL 56

Expert Comment

by:Cliff Galiher
ID: 33563734
The security server, like most versions of windows, can only have one default gateway.Not one default gateway per NIC, but one default gateway. So this sounds like a normal configuration to me. How have you decided that the default gateway is the issue?
-Cliff
 
0
 

Author Comment

by:ggsbs
ID: 33564728
During the installation of EBS we confiure one NIC for external access and one NIC for internal access.
The normal result of ipconfig is :
C:\>ipconfig

Configuration IP de Windows


Carte Ethernet Connexion au reseau Internet :

   Suffixe DNS propre à la connexion. . . :
   Adresse IPv4. . . . . . . . . . . : 192.168.169.20
   Masque de sous-réseau. . . . . . . . . : 255.255.255.0
   Passerelle par défaut. . . . . . . . . : 192.168.169.10

Carte Ethernet Connexion au reseau local :

   Suffixe DNS propre à la connexion. . . :
   Adresse IPv4. . . . . . . . . . . : 192.168.168.1
   Masque de sous-réseau. . . . . . . . . : 255.255.255.0
   Passerelle par défaut. . . . . . . . . :

No default gateway on my local network
Now when I modify any rule and I valid the modification on TMG I get this result of ipconfig
C:\>ipconfig

Configuration IP de Windows


Carte Ethernet Connexion au reseau Internet :

   Suffixe DNS propre à la connexion. . . :
   Adresse IPv4. . . . . . . . . . . : 192.168.169.20
   Masque de sous-réseau. . . . . . . . . : 255.255.255.0
   Passerelle par défaut. . . . . . . . . : 192.168.169.10

Carte Ethernet Connexion au reseau local :

   Suffixe DNS propre à la connexion. . . :
   Adresse IPv4. . . . . . . . . . . : 192.168.168.1
   Masque de sous-réseau. . . . . . . . . : 255.255.255.0
   Passerelle par défaut. . . . . . . . . : 0.0.0.0

C:\>

Regards.
GG.
0
 

Author Comment

by:ggsbs
ID: 33564744
Manually we cannot type manually 0.0.0.0 on the field of default gateway. :(
0
 
LVL 56

Accepted Solution

by:
Cliff Galiher earned 500 total points
ID: 33566023
Looks like your metadata got corrupted in the EBS store in AD. EBS checks this whenever TMG syncs, so this is actually an EBS issue. Log into the security servr and run the "Change IP Address"wizard (an EBS specific tool) and enter all of the appropriate data. This will write new data to the EBS store and fix the problem.
 
-Cliff
 
0
 

Author Comment

by:ggsbs
ID: 33569591
Hi,

This the good way, I did it, but first it was not working properly because we change Administrator account password and we do not chnage it in SCE. After changing using console of SCE the new configuration was saved on AD.
Thank you very much.

Regards.
GG.
0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Welcome to my series of short tips on migrations. Whilst based on Microsoft migrations the same principles can be applied to any type of migration. My first tip Migration Tip #1 – Source Server Health can be found here: http://www.experts-exchang…
Issue: One Windows 2008 R2 64bit server on the network unable to connect to a buffalo Device (Linkstation) with firmware version 1.56. There are a total of four servers on the network this being one of them. Troubleshooting Steps: Connect via h…
With the power of JIRA, there's an unlimited number of ways you can customize it, use it and benefit from it. With that in mind, there's bound to be things that I wasn't able to cover in this course. With this summary we'll look at some places to go…
Edureka is one of the fastest growing and most effective online learning sites.  We are here to help you succeed.

911 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

21 Experts available now in Live!

Get 1:1 Help Now