Solved

configure rv082 vpn connection

Posted on 2010-08-31
11
1,653 Views
Last Modified: 2012-05-10
i am trying to configure my router rv082 to allow outisde user to connect my vpn

trying everything but it doesnt work

where can i start to resolv my problem
0
Comment
Question by:GCI_SUPPORT
  • 5
  • 5
11 Comments
 
LVL 4

Expert Comment

by:Allvirtual
ID: 33570624
Maybe this helps. You can download the NCP client from the website http://www.ncp-e.com it's free and fully functional for 30 days.
Installation-Linksys-20100714.pdf
0
 
LVL 63

Expert Comment

by:SysExpert
ID: 33570711
Depends on whether you are using just windows, or also a VPN client program.

Have you looked at the logs on both ends ?

Phase 1, 2 and the PSK need to match on both ends.

I hope this helps !
0
 

Author Comment

by:GCI_SUPPORT
ID: 33570931
2010-08-31 15:45:52  ERROR - 4021: IKE(phase1) - Could not contact Gateway (No response) in state <Wait for Message 2> - Test Connection IPSec Native.
0
 
LVL 63

Expert Comment

by:SysExpert
ID: 33571059
well either your gateway address is not correct ( public IP ), or you are blocking your VPN at the firewall

I hope this helps !
0
 

Author Comment

by:GCI_SUPPORT
ID: 33571389
2010-08-31 16:29:49  ERROR - 4037: IKE(phase2):Waiting for message2, cleared by phase1 - Test Connection IPSec Native.
0
Highfive + Dolby Voice = No More Audio Complaints!

Poor audio quality is one of the top reasons people don’t use video conferencing. Get the crispest, clearest audio powered by Dolby Voice in every meeting. Highfive and Dolby Voice deliver the best video conferencing and audio experience for every meeting and every room.

 

Author Comment

by:GCI_SUPPORT
ID: 33571438
also there is a way to use only the windows vpn client
0
 
LVL 63

Expert Comment

by:SysExpert
ID: 33571886
Yes you can, but it is not as secure.

Did you check the Documentation and site for setting up a Windows VPN dialup ?

I remember it was pretty easy although we dumped this in favor of Juniper Netscreens

0
 

Author Comment

by:GCI_SUPPORT
ID: 33571998
It not important for now
I just want to make it work
So there is a tutorial or somerhing else that can help me to configure it out
0
 
LVL 63

Expert Comment

by:SysExpert
ID: 33572165
0
 

Author Comment

by:GCI_SUPPORT
ID: 33573028
I had follow the tutorial from thegreenbow and iget the invalid cookie error, what they mean by resseting the vpn connection on each side
0
 
LVL 63

Accepted Solution

by:
SysExpert earned 500 total points
ID: 33573253
0

Featured Post

How your wiki can always stay up-to-date

Quip doubles as a “living” wiki and a project management tool that evolves with your organization. As you finish projects in Quip, the work remains, easily accessible to all team members, new and old.
- Increase transparency
- Onboard new hires faster
- Access from mobile/offline

Join & Write a Comment

*Adobe Acrobat 9 was used for this article. Particular steps may vary depending on software versions. 1. Create a framework of your form in Word, leaving space where you’d ultimately like the Adobe fields to appear.  (Note: I use the blank lines …
If you use NetMotion Mobility on your PC and plan to upgrade to Windows 10, it may not work unless you take these steps.
In this first video of the three-part Xpdf series, we introduce and describe Xpdf, a library containing nine command line utilities that perform various functions on PDF files. We show where the library is located and how to download it, discuss its…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

743 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

10 Experts available now in Live!

Get 1:1 Help Now