Solved

Backing up ios configs with tftpd32 - getting an access denied error

Posted on 2010-09-01
2
4,639 Views
Last Modified: 2012-05-10
I'm trying to backup the configurations for my switches. The switch here is a 3560-24PS-s. I havev backed it up with the same tftp the only difference is I have a new windows 7 64-bit OS and hardware. I installed it and telneted into the switch and this is what happens.


32-Switch-1#en
32-Switch-1#copy running-config tftp
Address or name of remote host []? 10.3.50.108
Destination filename [32-switch-1-confg]?
TFTP: error code 2 received - 16739

%Error opening tftp://10.3.50.108/32-switch-1-confg (Permission denied)
32-Switch-1#copy running-config tftp
Address or name of remote host []? 10.3.50.108
Destination filename [32-switch-1-confg]?
TFTP: error code 2 received - 16739

%Error opening tftp://10.3.50.108/32-switch-1-confg (Permission denied)
32-Switch-1#ping 10.3.50.108

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.3.50.108, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 16/20/33 ms
32-Switch-1#

What am I missing? What causes TFTP: error code 2 received - 16739

Regards,
ABBEtech
0
Comment
Question by:abbetech
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 17

Accepted Solution

by:
Kvistofta earned 500 total points
ID: 33579404
It clearly saids "permission denied" which means that the switch has connectivity with the tftp-server but the server doesnt allow the transfer. My guess is that there is already a file with that name that is not allowed to be owerwritten or another permission-error on the server.

/kvistofta
0
 
LVL 1

Author Closing Comment

by:abbetech
ID: 33579595
I had shared the TFTP directory folder on my new laptop. Thanks!
0

Featured Post

Online Training Solution

Drastically shorten your training time with WalkMe's advanced online training solution that Guides your trainees to action. Forget about retraining and skyrocket knowledge retention rates.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Checking Network connectivity 3 82
GPS For Commercial Vehicles 10 75
PXE boot for ESXi on CENTOS 7 25 110
How can we use Acrylic Wi-Fi to observe our LAN 7 51
Short answer to this question: there is no effective WiFi manager in iOS devices as seen in Windows WiFi or Macbook OSx WiFi management, but this article will try and provide some amicable solutions to better suite your needs.
PRTG Network Monitor lets you monitor your bandwidth usage, so you know who is using up your bandwidth, and what they're using it for.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

732 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question