<div>
I had shared the TFTP directory folder on my new laptop. Thanks!
</div>


I had shared the TFTP directory folder on my new laptop. Thanks!

<div>
<div class="content wysiwyg-content">
I'm trying to backup the configurations for my switches. The switch here is a 3560-24PS-s. I havev backed it up with the same tftp the only difference is I have a new windows 7 64-bit OS and hardware. I installed it and telneted into the switch and this is what happens.<br />
<br />
<br />
32-Switch-1#en<br />
32-Switch-1#copy running-config tftp<br />
Address or name of remote host []? 10.3.50.108<br />
Destination filename [32-switch-1-confg]?<br />
T<a href="FTP" rel="ugc">FTP</a>: error code 2 received - 16739<br />
<br />
%Error opening t<a href="ftp://10.3.50.108/32-switch-1-confg" rel="ugc">ftp://10.3.50.108/32-switch-1-confg</a> (Permission denied)<br />
32-Switch-1#copy running-config tftp<br />
Address or name of remote host []? 10.3.50.108<br />
Destination filename [32-switch-1-confg]?<br />
T<a href="FTP" rel="ugc">FTP</a>: error code 2 received - 16739<br />
<br />
%Error opening t<a href="ftp://10.3.50.108/32-switch-1-confg" rel="ugc">ftp://10.3.50.108/32-switch-1-confg</a> (Permission denied)<br />
32-Switch-1#ping 10.3.50.108<br />
<br />
Type escape sequence to abort.<br />
Sending 5, 100-byte ICMP Echos to 10.3.50.108, timeout is 2 seconds:<br />
!!!!!<br />
Success rate is 100 percent (5/5), round-trip min/avg/max = 16/20/33 ms<br />
32-Switch-1#<br />
<br />
What am I missing? What causes T<a href="FTP" rel="ugc">FTP</a>: error code 2 received - 16739<br />
<br />
Regards,<br />
ABBEtech
</div>
</div>


I'm trying to backup the configurations for my switches. The switch here is a 3560-24PS-s. I havev backed it up with the same tftp the only difference is I have a new windows 7 64-bit OS and hardware. I installed it and telneted into the switch and this is what happens.


32-Switch-1#en
32-Switch-1#copy running-config tftp
Address or name of remote host []? 10.3.50.108
Destination filename [32-switch-1-confg]?
TFTP: error code 2 received - 16739

%Error opening tftp://10.3.50.108/32-switch-1-confg (Permission denied)
32-Switch-1#copy running-config tftp
Address or name of remote host []? 10.3.50.108
Destination filename [32-switch-1-confg]?
TFTP: error code 2 received - 16739

%Error opening tftp://10.3.50.108/32-switch-1-confg (Permission denied)
32-Switch-1#ping 10.3.50.108

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.3.50.108, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 16/20/33 ms
32-Switch-1#

What am I missing? What causes TFTP: error code 2 received - 16739

Regards,
ABBEtech

Backing up ios configs with tftpd32 - getting an access denied error

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.

Switches / Hubs

Networking is the process of connecting computing devices, peripherals and terminals together through a system that uses wiring, cabling or radio waves that enable their users to communicate, share information and interact over distances. Often associated are issues regarding operating systems, hardware and equipment, cloud and virtual networking, protocols, architecture, storage and management.