Solved

Cisco 7825 UCM - back to factory default

Posted on 2010-09-01
1
406 Views
Last Modified: 2013-12-27
Half way through installing a subscriber I ran into I/O problems and had to reboot (It would respond to not keyboard input so no other choice).  Now something is messed up with the login process.  I would like to get back to factory default  - no host name, no admin password yada yada.  How to do this?  Thanks.
0
Comment
Question by:amigan_99
1 Comment
 
LVL 1

Accepted Solution

by:
amigan_99 earned 0 total points
ID: 33580274
The answer is to use the recovery CD that comes with the 7825.
0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

The point of this post is to give you a copy/paste installation solution to setting up Asterisk 1.6 on Ubuntu 9.04 (or similar) server. # Setup the system apt-get install subversion apt-get install make apt-get install linux-source kernel-p…
There are no good configuration guides for HP-H3C router to LYNC on the web. :( Big statement, but we havent been able to find one yet. We did find the following document useful, but the information was not enough to use H3C router for use as a L…
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…

832 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question