Solved

Static VLAN trunk between Linksys SRW2024 and HP Procurve 2610

Posted on 2010-09-02
4
955 Views
Last Modified: 2012-05-10
Hi Experts,

I need to handle some Static VLANs between Linksys SRW2024 and HP Procurve 2610
Is this feasible ?? proof ?

Please advise and thanks a lot !
0
Comment
Question by:Shakthi777
  • 2
  • 2
4 Comments
 
LVL 2

Accepted Solution

by:
keakathleen earned 500 total points
ID: 33591579
I don't have any proof but if both switches support 802.1q vlans (I would assume they both would) then you should be able to egress static vlans on the ports you would like and traffic should pass.
0
 
LVL 2

Assisted Solution

by:keakathleen
keakathleen earned 500 total points
ID: 33591584
I am also assuming both of these switches are managed types of switches. From a quick Google, I think they both are.
0
 

Author Comment

by:Shakthi777
ID: 33594021
any HOW TO document on trunking Linksys SRW2024 ???

Thanks a lot for your time !
0
 

Author Closing Comment

by:Shakthi777
ID: 33594049
tnx !
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

I eventually solved a perplexing problem setting up telnet for a new switch.  I installed a new Cisco WS-03560X-24P switch connected to an existing Cisco 4506 running a WS-X4013-10GE Sup II-Plus. After configuring vlans and trunking,  I could no…
Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

773 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question