We are running Microsoft SBS 2008 virtualized on Windows Server 2008 Hyper-V. The disk drive on which the SBS VHD resides is out of space and there is no room to expand it. I have another drive that is empty. How do I move the VHD to the new drive?
If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.
It Is not possible to enable LLDP in vSwitch(at least is not supported by VMware), so in this article we will enable this, and also go trough how to enabled CDP and how to get this information in vSwitches and also in vDS.
This tutorial will give a short introduction and overview of Backup Exec 2012 and how to navigate and perform basic functions.
Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as conne…
This tutorial will show how to configure a single USB drive with a separate folder for each day of the week. This will allow each of the backups to be kept separate preventing the previous day’s backup from being overwritten.
The USB drive must be s…