Solved

Trixbox CE and Sangoma A200 Card

Posted on 2010-09-03
5
842 Views
Last Modified: 2012-05-10
Hello, I have the latest version of Trixbox CE, 2.8.0.4 and have installed a Sangoma A200 card with 2 daughter cards.  (12 ports total).  I installed the Wanpipe RPM and ran through the setup (I think they are setup right but have never worked with analog cards.)  How do I setup each port as an extension?
Thanks in advance for any help!
0
Comment
Question by:digital0g1c
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
5 Comments
 
LVL 11

Expert Comment

by:jfaubiontx
ID: 33599360
Are you using FXS or FXO ports?
0
 
LVL 1

Author Comment

by:digital0g1c
ID: 33600946
FXO ports, 12 of them.
0
 
LVL 11

Expert Comment

by:jfaubiontx
ID: 33605702
I was afraid of that. The FXO is used to connect an analog line to a telco provider. To set up the lines as extensions that you can hang an analog phone on you need FXS ports.
0
 
LVL 1

Author Comment

by:digital0g1c
ID: 33608616
Thanks!  I have a swap out request in with the reseller.  What do I need to do once I have the correct modules?

Thanks!

0
 
LVL 11

Accepted Solution

by:
jfaubiontx earned 500 total points
ID: 33608816
Once you get the daughter boards in, run genzaptelconf to setup the channels. Your zapata-auto.conf file should show the zap channels as fxs_ks. Then go to the Extensions page of trixbox. Click add extension and select Generic ZAP Device and click submit. Set the extension number, name and enter the first zap channel. Click submit and then apply the changes. Plug in a phone and you should have dial tone. Dial *65 to make sure you have the right port.
0

Featured Post

Flexible connectivity for any environment

The KE6900 series can extend and deploy computers with high definition displays across multiple stations in a variety of applications that suit any environment. Expand computer use to stations across multiple rooms with dynamic access.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
surface mount resistors 7 133
Sending SMS messages from a Landline 2 153
CISCO IP phone 7940 Series 10 74
Cisco Phone implementation supported backups 1 72
This is a step by step guide on creating single number reach (mobility) for Cisco Call Manager.  After configuring this when someone calls your deskphone after 3-4 rings your cell phone will start to ring.  If you do not answer the call will go to y…
If your business is like most, chances are you still need to maintain a fax infrastructure for your staff. It’s hard to believe that a communication technology that was thriving in the mid-80s could still be an essential part of your team’s modern I…
Internet Business Fax to Email Made Easy - With eFax Corporate (http://www.enterprise.efax.com), you'll receive a dedicated online fax number, which is used the same way as a typical analog fax number. You'll receive secure faxes in your email, fr…
Internet Business Fax to Email Made Easy - With eFax Corporate (http://www.enterprise.efax.com), you'll receive a dedicated online fax number, which is used the same way as a typical analog fax number. You'll receive secure faxes in your email, fr…

751 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question