Solved

Server 2003 Share slow from Server 2008 R2

Posted on 2010-09-04
2
978 Views
Last Modified: 2012-05-10
Hello Experts,

I have a Windows Storage Server 2003 machine sharing a folder. This folder can be accessed from Server 2003 machines and XP machines very quickly. However, accessing this folder from any Server 2008 machines is extremely slow. It takes a quite while to browse through the folders and view it's contents. What could this be? I also ran a IO test to this share from the 2008 servers and it is getting less than 1 IOP which is extremely bad.

Thanks!
0
Comment
Question by:Crucio606
2 Comments
 
LVL 8

Accepted Solution

by:
Emptyone earned 500 total points
ID: 33605673
Try disabling tcp autotuning. This has to be done from an "Elevated" command prompt.
This is the command to run:
netsh interface tcp set global autotuning=disabled
If no changes, then you can enable it again.
And if the server has Broadcom interfaces, then you can try to disable tcp chimney: http://support.microsoft.com/kb/951037

0
 

Author Comment

by:Crucio606
ID: 33606641
Thank you. You pointed me in the right direction & after a reboot of the server I am able to browse much quicker.

Cheers!
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
file name warning 4 40
need help with active directory 4 45
Mysterious disks wanting to be formatted 6 41
Group Policy Mapped Drives - Work Offline? 7 25
Scenario:  You do full backups to a internal hard drive in either product (SBS or Server 2008).  All goes well for a very long time.  One day, backups begin to fail with a message that the disk is full.  Your disk contains many, many more backups th…
Sometimes drives fill up and we don't know why.  If you don't understand the best way to use the tools available, you may end up being stumped as to why your drive says it's not full when you have no space left!  Here's how you can find out...
This tutorial will give a an overview on how to deploy remote agents in Backup Exec 2012 to new servers. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as connecting to a remote Back…
This tutorial will walk an individual through the steps necessary to install and configure the Windows Server Backup Utility. Directly connect an external storage device such as a USB drive, or CD\DVD burner: If the device is a USB drive, ensure i…

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question