• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 1361
  • Last Modified:

Nortel BCM 400 VoIP Setup

Hi, I have two sites.. both with BCM 400's. What do I need to do in order to activate VoIP? Within the BCM I mean.. not port forwarding etc!

Thanks
0
radiosupport
Asked:
radiosupport
  • 2
1 Solution
 
FunktopusCommented:
If you hit the IP of the system via web browser you should be able to login to the system - at which point you'll be presented with several menus. An alternative is to use the Nortel Business Elements manager software which comes bundled to perform the same task. Once in there - you have areas like mailbox manager etc where you can set and tweak the various options offered by the BCM system.

Hope that helps you get started - Nick.
0
 
radiosupportAuthor Commented:
Thanks, yes can't see anything to do with VoIP in there.. do I need to buy a new licence or something?
0
 
FunktopusCommented:
Not sure - you're best and least time consuming bet would be to engage Nortel directly although they may deny assistance unless you have a maintenance agreement.
0

Featured Post

Meet the Family that is Made for Collaboration

The TeamConnect Family product group as part of the Sennheiser for Business Portfolio comprising high-quality, technically well-conceived meeting solutions for business communication – designed for any meeting room and any meeting situation.

  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now