• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 1274
  • Last Modified:

swr2024 vlan configuration

Hi experts,

What im trying to do is not explained anywhere i can find.

I got 3 Vlans.

Data 192.168.0.0 /24 Vlan 1
Wireless 192.168.100.0 /24 Vlan 2
Phone 192.168.200.0/24 Vlan3

SBS 2008 manages DHCP for VLAN1
Cisco 877w Manages DHCP for Vlan2

We are about to install a mitel phone system and put it onto vlan3 and are not sure how to get vlan1 and vlan3 to work without causing issues. We have 3 Switches (SRW2024) and 2 switches which are dlink just dumb layer 2 switches.

I'm not sure how linksys tags and untags the vlans but i've already created vlan 3 on the router so that i can ping vlan 1 and vlan3 (intervlan routing). All i need to know is how can i tag/untag ports on the linksys so no matter phone/data they will get the correct ips.

Regards,
HM  
0
mun_84
Asked:
mun_84
1 Solution
 
from_expCommented:
please take this manual:
http://www.cisco.com/en/US/docs/switches/lan/csbms/srw2048/administration/guide/SRW-US_v10_UG_A-Web.pdf
page 27.

in general, if you want to transmit/receive multiple vlans on a single port, than that port should tag packets (port should be trunk in cisco language)
when port is in trunk, just select what vlans you want to communicate through this port.
0

Featured Post

What does it mean to be "Always On"?

Is your cloud always on? With an Always On cloud you won't have to worry about downtime for maintenance or software application code updates, ensuring that your bottom line isn't affected.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now