Solved

Site to Site VPN between (statis) Asa 5510 <-----(internet)------> (dynamic) rv042

Posted on 2010-09-07
2
803 Views
Last Modified: 2012-05-10
Is it even possible to set up a Site to Site with a 5510 and a rv042?

Without dynDNS.

Thanks
0
Comment
Question by:kblackwel
2 Comments
 
LVL 35

Accepted Solution

by:
Ernie Beek earned 125 total points
ID: 33627126
Perhaps this will help: http://www.mattiasholm.com/node/15
0
 

Author Closing Comment

by:kblackwel
ID: 33875856
Closest
0

Featured Post

Live: Real-Time Solutions, Start Here

Receive instant 1:1 support from technology experts, using our real-time conversation and whiteboard interface. Your first 5 minutes are always free.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Juniper VPN devices are a popular alternative to using Cisco products. Last year I needed to set up an international site-to-site VPN over the Internet, but the client had high security requirements -- FIPS 140. What and Why of FIPS 140 Federa…
For months I had no idea how to 'discover' the IP address of the other end of a link (without asking someone who knows), and it drove me batty. Think about it. You can't use Cisco Discovery Protocol (CDP) because it's not implemented on the ASAs.…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

786 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question