Solved

Allocating bandwidth to a particular LAN 2 LAN VPN connection

Posted on 2010-09-08
1
498 Views
Last Modified: 2012-08-13
Hi,
I have 3x T1 multilinked in Cisco 2801 router for a 4.5mb total bandwidth. I have a Cisco VPN concentrator 3000 that has a number of LAN 2 LAN vpn tunnels one in particular is a LAN 2 LAN to our data center.
Is there a way to allocated let’s say 1.5 MB just to that particular tunnel another words I like the data center LAN 2 LAN VPN to have 1.5mb dedicated bandwidth.

Thanks

0
Comment
Question by:Sean
1 Comment
 
LVL 34

Accepted Solution

by:
Istvan Kalmar earned 500 total points
ID: 33628653
HI,

You able to do this, please refer this page:

http://www.thebryantadvantage.com/LowLatencyQueueingLLQCiscoCertificationReview.htm

Best regards,
Istvan
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Radius Debug Error 16 93
BGP Code 12 47
NAT Public IP through a VPN 17 42
Cisco 800 router unable to connect through TPG network 12 6
Tired of waiting for your show or movie to load?  Are buffering issues a constant problem with your internet connection?  Check this article out to see if these simple adjustments are the solution for you.
Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

822 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question