Solved

Hyper-V R2 : Created VLAN and lost Connection to SERVER

Posted on 2010-09-08
2
1,019 Views
Last Modified: 2013-11-06
I need some help

I downloaded and Installed Hyper-V r2 .

Install went fine and i was able to enable the remote management features and add VMs from my windows 7 Hyper-v MMC.

I was able to create and start Two VMS.. Neither of which had access to the LAN acces.

I created a Vlan (external) and hit apply.. Since then  i can no longer connect to Hyper-v through the MMC on my local windows 7 maching or anything.. .I have console access to the box, but i'm not sure why creating the vlan (external) killed my connection to the server or how to revert the changes

I can't figured it out and this is the second time I had to install Hyper-v r2 as the problem happened last time and i didn't realize it was the change to the v-lan settings..

0
Comment
Question by:Adrenaline_x
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 17

Accepted Solution

by:
James Haywood earned 500 total points
ID: 33653108
If you set the External VLAN without "allow management operating system to share this network adaptor" then you will lost connectivity unless you have a second NIC to connect to.

Quick guide to Virtual Networks under Hyper-V
http://www.windowsnetworking.com/articles_tutorials/Understanding-Virtual-Networking-Microsoft-Hyper-V.html
0
 

Author Comment

by:Adrenaline_x
ID: 33662853
I did select that button... But It turns out i have a flaky switch that is dropping connectivity to the management port (second nic).

Thanks for the link.
0

Featured Post

Use Case: Protecting a Hybrid Cloud Infrastructure

Microsoft Azure is rapidly becoming the norm in dynamic IT environments. This document describes the challenges that organizations face when protecting data in a hybrid cloud IT environment and presents a use case to demonstrate how Acronis Backup protects all data.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Introduction Windows 2012 is here - it is upon us, and I hope that like me, you will upgrade your Hyper-V to the new version which has been promised to be a lot more stable, flexible and powerful than its predecessor in Windows 2008 R2.  Setting up…
From Coral's  "So You Want To Play With Computers" Series A bit of background first, so this story will make a little sense. One day, probably because he needed a good laugh, Finagle hooked me up with a church to upgrade/run their Media Booth.…

756 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question