Solved

Web Server 2008 R2 Install Failure on Tyan s8212 Board

Posted on 2010-09-09
1
628 Views
Last Modified: 2012-06-27
I have a TYAN S8212 (S8212WGM3NR) board with BIOS ver 1.04.  I cannot install Web Server 2008 R2.   Tyan website says this windows version is compatible with this board.  The installation fails when it attempts restart with an error - kernel not found.

I have tried many BIOS settings with no help.   I assume there may be a 32 driver on baord somewhere that I cannot find.  Anyone with any ideas to help ??

System:
 TYAN S8212 (S8212WGM3NR)
 500 Gb and 2 TB WD RE4 SATA Drives
 TDK DVD Drive IDE
 16Gb Memory
 Dual Port PCI Intel NIC card
0
Comment
Question by:eanmd
1 Comment
 
LVL 9

Accepted Solution

by:
shalabhsharma earned 500 total points
ID: 33652326
You should directly contact with http://www.tyan.com/
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Prologue It is often required to host multiple websites on a single instance of IIS, mostly in development environments instead of on production servers. I am sure it is not much a preferred solution on production servers but this is at least a pos…
When it comes to showing a 404 error page to your visitors, you do not want that generic page to show, and you especially do not want your hosting provider’s ad error page to show either. In this article, I will show you how to enable the custom 40…
This tutorial will walk an individual through locating and launching the BEUtility application to properly change the service account username and\or password in situation where it may be necessary or where the password has been inadvertently change…
This tutorial will walk an individual through the steps necessary to enable the VMware\Hyper-V licensed feature of Backup Exec 2012. In addition, how to add a VMware server and configure a backup job. The first step is to acquire the necessary licen…

821 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question